TV 크기와 시청 거리, 벽면 재질을 계산하여 최적의 설치 위치와 자재 목록을 산출합니다.
You are a careful TV installation planner. Help me plan a wall-mounted TV using the formulas below. Compute every number; do not estimate from memory. Show each result rounded to 0.1 inch (and feet where useful), then a short explanation.
My setup:
- TV diagonal: ${tv_diagonal_in:65} inches (assume a 16:9 screen unless I say otherwise)
- Distance from my eyes, when seated, to the wall: ${seat_distance_in:110} inches
- Seated eye height from the floor: ${eye_height_in:42} inches
- Wall type: ${wall_type:wood stud drywall} (wood stud, metal stud, brick, concrete or plaster)
- Mount type: ${mount_type:fixed} (fixed, tilting or full-motion)
- Furniture under the TV (console, fireplace, soundbar): ${below_tv:media console 24 inches tall}
- Distance along the wall from the TV to the source devices or outlet: ${cable_run_in:72} inches
Formulas (16:9):
1. Screen width = diagonal × 0.8716; screen height = diagonal × 0.4903.
2. Seating distance range: closest = width ÷ (2 × tan 20°) = width × 1.374 (40° field of view, THX); farthest = width ÷ (2 × tan 15°) = width × 1.866 (30° field of view, SMPTE). Report my actual horizontal field of view = 2 × atan(width ÷ (2 × seat distance)) and say whether I am inside the range, too close or too far.
3. Mount height: put the screen centre at seated eye height, then raise it by at most 2–4 inches if the bottom edge would clear the furniture by less than 3 inches. Bottom edge = centre − height ÷ 2; top edge = centre + height ÷ 2. If the centre must go above 50 inches (e.g. over a fireplace), warn about neck strain and suggest a tilting or pull-down mount.
4. Cable length: run length plus 24 inches of slack, rounded up to the next stock size (3, 6, 10, 15, 25, 35, 50 ft). Above 25 ft for 4K/HDR, suggest an active or fibre HDMI cable.
Then give:
- A results table (screen size, seating range, my field of view, centre/bottom/top heights, mount stand-off for my mount type: fixed about 1.5 in, tilting about 2.5 in, full-motion 3–25 in).
- A materials checklist with quantities, choosing anchors for my wall type: wood stud = lag bolts into at least two studs; metal stud = toggle bolts rated for the load, or blocking; brick or concrete = sleeve or wedge anchors into solid masonry, not mortar joints; plaster = locate the framing and never rely on plaster alone.
- Safety checks: the mount is rated above the TV's weight and fits its VESA pattern; never run a standard TV power cord inside a wall (use a code-listed in-wall power relocation kit and in-wall rated CL2/CL3 HDMI); check for pipes and wires before drilling; follow the mount and TV manuals and local electrical and building codes.
- One sentence on whether a larger or smaller TV would suit my seating distance better.
Ask me for any value that is missing or implausible before calculating.당신은 신중한 TV 설치 기획자입니다. 아래 공식을 사용하여 벽걸이 TV 설치 계획을 세우도록 도와주세요. 추정하지 말고 모든 수치를 정확히 계산하세요. 각 결과는 0.1인치 단위(필요한 경우 피트 병행)로 반올림하여 보여주고 간단한 설명을 덧붙이세요. 내 환경: - TV 대각선 길이: [tv_diagonal_in:65]인치 (별도 언급이 없으면 16:9 화면으로 가정) - 앉았을 때 눈에서 벽까지의 거리: [seat_distance_in:110]인치 - 바닥에서 앉았을 때의 눈높이: [eye_height_in:42]인치 - 벽면 재질: [wall_type:목재 스터드 석고보드] (목재 스터드, 금속 스터드, 벽돌, 콘크리트 또는 회반죽) - 거치대 유형: [mount_type:고정형] (고정형, 각도조절형 또는 상하좌우 조절형) - TV 아래 가구 (거실장, 벽난로, 사운드바 등): [below_tv:높이 24인치 미디어 콘솔] - TV에서 기기 또는 콘센트까지의 벽면 거리: [cable_run_in:72]인치 계산 공식 (16:9 기준): 1. 화면 너비 = 대각선 × 0.8716; 화면 높이 = 대각선 × 0.4903. 2. 권장 시청 거리 범위: 최단 = 너비 ÷ (2 × tan 20°) = 너비 × 1.374 (THX 40° 시야각); 최장 = 너비 ÷ (2 × tan 15°) = 너비 × 1.866 (SMPTE 30° 시야각). 실제 수평 시야각 = 2 × atan(너비 ÷ (2 × 시청거리))을 계산하고 범위 내/너무 가까움/너무 먼지 알려주세요. 3. 마운트 높이: 화면 중앙을 앉은 눈높이에 맞추고, 하단 테두리가 가구와 3인치 미만으로 겹칠 경우 최대 2~4인치 올립니다. 하단 테두리 = 중앙 − 높이 ÷ 2; 상단 테두리 = 중앙 + 높이 ÷ 2. 중앙이 50인치 이상 올라가면 목 피로도를 경고하고 각도조절형 또는 드롭다운 마운트를 제안하세요. 4. 케이블 길이: 설치 거리 + 24인치 여유분, 표준 규격(3, 6, 10, 15, 25, 35, 50피트)으로 올림. 4K/HDR 25피트 초과 시 액티브 또는 광 HDMI 케이블을 제안하세요. 다음 항목을 출력하세요: - 결과 요약 표 (화면 크기, 시청 거리 범위, 내 시야각, 중앙/하단/상단 높이, 마운트 돌출 거리). - 벽면 유형별 앵커가 포함된 자재 체크리스트 및 수량. - 안전 점검 사항 (하중 및 VESA 규격, 매립 전원선 안전 지침, 타공 전 배관/전선 점검 등). - 현재 시청 거리에 더 크거나 작은 TV가 어울릴지에 대한 한 줄 의견. 계산하기 전 빠지거나 불합리한 수치가 있다면 먼저 물어보세요.
출처 · prompts.chat · TV Wall Planner: Screen Size, Seating Distance, Mount Height and Materials — 원문은 출처에 게시된 그대로이며, 권리는 원작자에게 있습니다.
Gemini로 실행한 결과입니다. 입력 항목에는 국내 환경의 예시값을 적용했습니다(AI 생성 — 사실 확인 필요).
You are a careful TV installation planner. Help me plan a wall-mounted TV using the formulas below. Compute every number; do not estimate from memory. Show each result rounded to 0.1 inch (and feet where useful), then a short explanation. My setup: - TV diagonal: 65 inches (assume a 16:9 screen unless I say otherwise) - Distance from my eyes, when seated, to the wall: 120 inches - Seated eye height from the floor: 40 inches - Wall type: concrete (wood stud, metal stud, brick, concrete or plaster) - Mount type: tilting (fixed, tilting or full-motion) - Furniture under the TV (console, fireplace, soundbar): media console 20 inches tall - Distance along the wall from the TV to the source devices or outlet: 60 inches Formulas (16:9): 1. Screen width = diagonal × 0.8716; screen height = diagonal × 0.4903. 2. Seating distance range: closest = width ÷ (2 × tan 20°) = width × 1.374 (40° field of view, THX); farthest = width ÷ (2 × tan 15°) = width × 1.866 (30° field of view, SMPTE). Report my actual horizontal field of view = 2 × atan(width ÷ (2 × seat distance)) and say whether I am inside the range, too close or too far. 3. Mount height: put the screen centre at seated eye height, then raise it by at most 2–4 inches if the bottom edge would clear the furniture by less than 3 inches. Bottom edge = centre − height ÷ 2; top edge = centre + height ÷ 2. If the centre must go above 50 inches (e.g. over a fireplace), warn about neck strain and suggest a tilting or pull-down mount. 4. Cable length: run length plus 24 inches of slack, rounded up to the next stock size (3, 6, 10, 15, 25, 35, 50 ft). Above 25 ft for 4K/HDR, suggest an active or fibre HDMI cable. Then give: - A results table (screen size, seating range, my field of view, centre/bottom/top heights, mount stand-off for my mount type: fixed about 1.5 in, tilting about 2.5 in, full-motion 3–25 in). - A materials checklist with quantities, choosing anchors for my wall type: wood stud = lag bolts into at least two studs; metal stud = toggle bolts rated for the load, or blocking; brick or concrete = sleeve or wedge anchors into solid masonry, not mortar joints; plaster = locate the framing and never rely on plaster alone. - Safety checks: the mount is rated above the TV's weight and fits its VESA pattern; never run a standard TV power cord inside a wall (use a code-listed in-wall power relocation kit and in-wall rated CL2/CL3 HDMI); check for pipes and wires before drilling; follow the mount and TV manuals and local electrical and building codes. - One sentence on whether a larger or smaller TV would suit my seating distance better. Ask me for any value that is missing or implausible before calculating.
요청하신 조건(65인치 TV, 시청거리 120인치, 눈높이 40인치, 콘크리트 벽, 틸트형 거치대, 20인치 거실장, 케이블 거리 60인치)을 바탕으로 계산한 설치 계획입니다.
■ 계산 결과 표
■ 자재 체크리스트
■ 안전 점검 사항
■ TV 크기 제언
현재 시청 거리(120인치)에서는 몰입감을 위해 75~85인치의 더 큰 TV를 선택하시는 것이 좋습니다.
mopick 개선안
원문을 그대로 넣으면 AI 가 매번 다르게 답하거나 중요한 부분을 빠뜨릴 수 있습니다. 개선안은 원문의 뜻과 언어는 그대로 두고 역할 · 바꿔 넣을 입력 칸 · 결과 형식 · 지킬 조건을 보완해 다시 쓴 버전입니다. 원문과 같은 곳(ChatGPT · Claude 등)에 그대로 붙여 넣어 쓰면 됩니다.
AI 자체 평가 — 개선안을 쓴 AI 가 명확성 · 구체성 · 결과 형식 · 재사용성 기준(100점)으로 직접 매긴 점수 · 결과를 돌려 검증한 값은 아님
이 개선안에 쓰인 기법 — 프롬프트 클래스에서 배우기
원문
You are a careful TV installation planner. Help me plan a wall-mounted TV using the formulas below. Compute every number; do not estimate from memory. Show each result rounded to 0.1 inch (and feet where useful), then a short explanation.
My setup:
- TV diagonal: ${tv_diagonal_in:65} inches (assume a 16:9 screen unless I say otherwise)
- Distance from my eyes, when seated, to the wall: ${seat_distance_in:110} inches
- Seated eye height from the floor: ${eye_height_in:42} inches
- Wall type: ${wall_type:wood stud drywall} (wood stud, metal stud, brick, concrete or plaster)
- Mount type: ${mount_type:fixed} (fixed, tilting or full-motion)
- Furniture under the TV (console, fireplace, soundbar): ${below_tv:media console 24 inches tall}
- Distance along the wall from the TV to the source devices or outlet: ${cable_run_in:72} inches
Formulas (16:9):
1. Screen width = diagonal × 0.8716; screen height = diagonal × 0.4903.
2. Seating distance range: closest = width ÷ (2 × tan 20°) = width × 1.374 (40° field of view, THX); farthest = width ÷ (2 × tan 15°) = width × 1.866 (30° field of view, SMPTE). Report my actual horizontal field of view = 2 × atan(width ÷ (2 × seat distance)) and say whether I am inside the range, too close or too far.
3. Mount height: put the screen centre at seated eye height, then raise it by at most 2–4 inches if the bottom edge would clear the furniture by less than 3 inches. Bottom edge = centre − height ÷ 2; top edge = centre + height ÷ 2. If the centre must go above 50 inches (e.g. over a fireplace), warn about neck strain and suggest a tilting or pull-down mount.
4. Cable length: run length plus 24 inches of slack, rounded up to the next stock size (3, 6, 10, 15, 25, 35, 50 ft). Above 25 ft for 4K/HDR, suggest an active or fibre HDMI cable.
Then give:
- A results table (screen size, seating range, my field of view, centre/bottom/top heights, mount stand-off for my mount type: fixed about 1.5 in, tilting about 2.5 in, full-motion 3–25 in).
- A materials checklist with quantities, choosing anchors for my wall type: wood stud = lag bolts into at least two studs; metal stud = toggle bolts rated for the load, or blocking; brick or concrete = sleeve or wedge anchors into solid masonry, not mortar joints; plaster = locate the framing and never rely on plaster alone.
- Safety checks: the mount is rated above the TV's weight and fits its VESA pattern; never run a standard TV power cord inside a wall (use a code-listed in-wall power relocation kit and in-wall rated CL2/CL3 HDMI); check for pipes and wires before drilling; follow the mount and TV manuals and local electrical and building codes.
- One sentence on whether a larger or smaller TV would suit my seating distance better.
Ask me for any value that is missing or implausible before calculating.개선안 · 색칠한 [칸]에 내 내용을 넣어 쓰세요
You are an expert TV installation planner and structural installer. Help me plan a wall-mounted TV using exact step-by-step calculations. Compute every number precisely using the formulas provided below; do not estimate from memory. Show all intermediate mathematical calculations clearly, then round each final result to 0.1 inches (and convert to feet/inches where useful) along with a concise explanation.
[INPUT SETUP]
- TV diagonal: ${tv_diagonal_in:65} inches (assume 16:9 screen ratio unless stated otherwise)
- Seated eye distance to wall: ${seat_distance_in:110} inches
- Seated eye height from floor: ${eye_height_in:42} inches
- Wall type: ${wall_type:wood stud drywall} (wood stud, metal stud, brick, concrete, plaster)
- Mount type: ${mount_type:fixed} (fixed, tilting, full-motion)
- Below TV structure/furniture: ${below_tv:media console 24 inches tall}
- Cable run distance along wall: ${cable_run_in:72} inches
[CALCULATION RULES]
1. Screen Dimensions: Width = diagonal × 0.8716; Height = diagonal × 0.4903.
2. Seating & Field of View (FOV):
- Recommended Range: Min (THX 40° FOV) = Width × 1.374; Max (SMPTE 30° FOV) = Width × 1.866.
- Actual FOV = 2 × atan(Width ÷ (2 × seat distance)). State whether seating is optimal, too close, or too far.
3. Mount & Clearance Heights:
- Ideal Centre = seated eye height. Raise by up to 2–4 inches if bottom edge (centre − height ÷ 2) clears below-TV structure by less than 3 inches. Top edge = centre + height ÷ 2.
- If Centre > 50 inches, append a neck strain warning and recommend a tilting or pull-down mount.
4. Cable Sizing: Total length = cable run + 24 inches slack, rounded up to next standard size (3, 6, 10, 15, 25, 35, 50 ft). Recommend active/optical HDMI if length > 25 ft for 4K/HDR.
[OUTPUT FORMAT]
- Calculation Steps: Briefly show intermediate values used.
- Structured Summary Table: Columns for Metric, Calculated Value, and Notes (cover Screen Size, Seating Range, FOV, Centre/Bottom/Top Heights, and Mount Stand-off: fixed ~1.5 in, tilting ~2.5 in, full-motion 3–25 in).
- Materials Checklist: Specific anchors based on wall type (Wood: lag bolts into ≥2 studs; Metal: toggle bolts/blocking; Brick/Concrete: masonry anchors; Plaster: framing attachment only).
- Safety & Code Compliance Checks: VESA/weight verification, code-compliant in-wall power kit (no raw cords), CL2/CL3 HDMI, and utility scan warning.
- Screen Recommendation: Exactly one sentence advising if a larger or smaller screen suits the seating distance better.
If any input is missing, ambiguous, or physically implausible, ask for clarification before calculating.