Claude Code 및 Gemini CLI 설정 파일에 안전한 읽기 전용(Read-Only) 명령어 권한만 선별해 추가합니다.
Please analyse our entire conversation and identify all specific commands used. Update permissions for both Claude Code and Gemini CLI. ## Reference Files - Claude: ~/.claude/settings.json - Gemini policy: ~/.gemini/policies/tool-permissions.toml - Gemini settings: ~/.gemini/settings.json - Gemini trusted folders: ~/.gemini/trustedFolders.json ## Instructions 1. Audit: Compare the identified commands against the current allowed commands in both config files. 2. Filter: Only include commands that provide read-only access to resources. 3. Restrict: Explicitly exclude any commands capable of modifying, deleting, or destroying data. 4. Update: Add only the missing read-only commands to both config files. 5. Constraint: Do not use wildcards. Each command must be listed individually for granular security. Show me the list of commands under two categories: Read-Only, and Write We are mostly interested in the read-only commands here that fall under the categories: Read, Get, Describe, View, or similar. Once I have approved the list, update both config files. ## Claude Format File: ~/.claude/settings.json Claude uses a JSON permissions object with allow, deny, and ask arrays. Allow format: `Bash(command subcommand:*)` Insert new commands in alphabetical order within the allow array. ## Gemini Format File: ~/.gemini/policies/tool-permissions.toml Gemini uses a TOML policy engine with rules at different priority levels. Rule types and priorities: - `decision = "deny"` at `priority = 200` for destructive operations - `decision = "ask_user"` at `priority = 150` for write operations needing confirmation - `decision = "allow"` at `priority = 100` for read-only operations For allow rules, use `commandPrefix` (provides word-boundary matching). For deny and ask rules, use `commandRegex` (catches flag variants). New read-only commands should be added to the appropriate existing `[[rule]]` block by category, or a new block if no category fits. Example allow rule: ```toml [[rule]] toolName = "run_shell_command" commandPrefix = ["command subcommand1", "command subcommand2"] decision = "allow" priority = 100 ``` ## Gemini Directories If any new directories outside the workspace were accessed, add them to: - `context.includeDirectories` in ~/.gemini/settings.json - ~/.gemini/trustedFolders.json with value "TRUST_FOLDER" ## Exceptions Do not suggest adding the following commands: - git branch: The -D flag will delete branches - git pull: Incase a merge is actioned - git checkout: Changing branches can interrupt work - ajira issue create: To prevent excessive creation of new issues - find: The -delete and -exec flags are destructive (use fd instead)
지금까지의 전체 대화를 분석하여 사용된 모든 특정 명령어를 식별해 주세요. Claude Code와 Gemini CLI 모두의 권한 설정을 업데이트합니다. ## 참조 파일 - Claude: ~/.claude/settings.json - Gemini 정책: ~/.gemini/policies/tool-permissions.toml - Gemini 설정: ~/.gemini/settings.json - Gemini 신뢰 폴더: ~/.gemini/trustedFolders.json ## 지침 1. 감사: 식별된 명령어를 두 설정 파일의 현재 허용된 명령어와 비교합니다. 2. 필터링: 리소스에 대한 읽기 전용(Read-Only) 액세스를 제공하는 명령어만 포함합니다. 3. 제한: 데이터를 수정, 삭제 또는 파괴할 수 있는 모든 명령어는 명시적으로 제외합니다. 4. 업데이트: 누락된 읽기 전용 명령어만 두 설정 파일에 추가합니다. 5. 제약 조건: 와일드카드를 사용하지 마세요. 정밀한 보안을 위해 각 명령어를 개별적으로 나열해야 합니다. 명령어 목록을 '읽기 전용'과 '쓰기' 두 가지 범주로 나누어 보여주세요. 여기서는 Read, Get, Describe, View 등과 유사한 범주에 속하는 읽기 전용 명령어에 주로 관심이 있습니다. 내가 목록을 승인하면 두 설정 파일을 모두 업데이트해 주세요. ## Claude 형식 파일: ~/.claude/settings.json Claude는 allow, deny, ask 배열이 있는 JSON 권한 객체를 사용합니다. 허용 형식: `Bash(command subcommand:*)` allow 배열 내에 알파벳 순서대로 새 명령어를 삽입하세요. ## Gemini 형식 파일: ~/.gemini/policies/tool-permissions.toml Gemini는 다양한 우선순위 수준의 규칙이 있는 TOML 정책 엔진을 사용합니다. 규칙 유형 및 우선순위: - 파괴적인 작업의 경우 `priority = 200`에서 `decision = "deny"` - 승인이 필요한 쓰기 작업의 경우 `priority = 150`에서 `decision = "ask_user"` - 읽기 전용 작업의 경우 `priority = 100`에서 `decision = "allow"` 허용 규칙에는 `commandPrefix`를 사용하세요. 거부 및 확인 규칙에는 `commandRegex`를 사용하세요. 새로운 읽기 전용 명령어는 범주별로 적절한 기존 `[[rule]]` 블록에 추가하거나, 맞는 범주가 없으면 새 블록을 만드세요. ## 예외 사항 다음 명령어는 추가를 제안하지 마세요: - git branch: -D 플래그가 브랜치를 삭제할 수 있음 - git pull: 병합이 실행될 수 있음 - git checkout: 브랜치 변경이 작업을 방해할 수 있음 - ajira issue create: 과도한 이슈 생성을 방지하기 위함 - find: -delete 및 -exec 플래그가 파괴적임 (대신 fd 사용)
출처 · prompts.chat · Update Agent Permissions — 원문은 출처에 게시된 그대로이며, 권리는 원작자에게 있습니다.
Gemini로 실행한 결과입니다. 입력 항목에는 국내 환경의 예시값을 적용했습니다(AI 생성 — 사실 확인 필요).
Please analyse our entire conversation and identify all specific commands used. Update permissions for both Claude Code and Gemini CLI. ## Reference Files - Claude: ~/.claude/settings.json - Gemini policy: ~/.gemini/policies/tool-permissions.toml - Gemini settings: ~/.gemini/settings.json - Gemini trusted folders: ~/.gemini/trustedFolders.json ## Instructions 1. Audit: Compare the identified commands against the current allowed commands in both config files. 2. Filter: Only include commands that provide read-only access to resources. 3. Restrict: Explicitly exclude any commands capable of modifying, deleting, or destroying data. 4. Update: Add only the missing read-only commands to both config files. 5. Constraint: Do not use wildcards. Each command must be listed individually for granular security. Show me the list of commands under two categories: Read-Only, and Write We are mostly interested in the read-only commands here that fall under the categories: Read, Get, Describe, View, or similar. Once I have approved the list, update both config files. ## Claude Format File: ~/.claude/settings.json Claude uses a JSON permissions object with allow, deny, and ask arrays. Allow format: `Bash(command subcommand:*)` Insert new commands in alphabetical order within the allow array. ## Gemini Format File: ~/.gemini/policies/tool-permissions.toml Gemini uses a TOML policy engine with rules at different priority levels. Rule types and priorities: - `decision = "deny"` at `priority = 200` for destructive operations - `decision = "ask_user"` at `priority = 150` for write operations needing confirmation - `decision = "allow"` at `priority = 100` for read-only operations For allow rules, use `commandPrefix` (provides word-boundary matching). For deny and ask rules, use `commandRegex` (catches flag variants). New read-only commands should be added to the appropriate existing `[[rule]]` block by category, or a new block if no category fits. Example allow rule: ```toml [[rule]] toolName = "run_shell_command" commandPrefix = ["command subcommand1", "command subcommand2"] decision = "allow" priority = 100 ``` ## Gemini Directories If any new directories outside the workspace were accessed, add them to: - `context.includeDirectories` in ~/.gemini/settings.json - ~/.gemini/trustedFolders.json with value "TRUST_FOLDER" ## Exceptions Do not suggest adding the following commands: - git branch: The -D flag will delete branches - git pull: Incase a merge is actioned - git checkout: Changing branches can interrupt work - ajira issue create: To prevent excessive creation of new issues - find: The -delete and -exec flags are destructive (use fd instead)
이전 대화 내역을 분석하여 실행된 명령어를 추적하고, 제시해주신 예외 규칙(git branch, git pull, git checkout, ajira issue create, find 제외)을 적용하여 분류했습니다.
1. Read-Only Commands (읽기 전용 명령어)
설정 파일의 'Allow' 목록에 추가할 후보입니다:
aws s3 lsfd .git statusgit logkubectl describe podkubectl get pods2. Write Commands (쓰기/수정/삭제 명령어)
읽기 전용 권한 부여에서 제외되는 명령어입니다:
aws s3 rmgit pushkubectl delete pod다음 단계 승인 요청:
위 Read-Only 목록이 정확한지 검토해 주세요.
승인해 주시면 와일드카드 없이 개별 명령어로 지정하여 아래 설정 파일들을 업데이트하겠습니다:
~/.claude/settings.json (알파벳순 정렬하여 allow 배열에 추가)~/.gemini/policies/tool-permissions.toml (commandPrefix 기반 decision = "allow" 규칙 추가)위 목록으로 진행할까요?
mopick 개선안
원문을 그대로 넣으면 AI 가 매번 다르게 답하거나 중요한 부분을 빠뜨릴 수 있습니다. 개선안은 원문의 뜻과 언어는 그대로 두고 역할 · 바꿔 넣을 입력 칸 · 결과 형식 · 지킬 조건을 보완해 다시 쓴 버전입니다. 원문과 같은 곳(ChatGPT · Claude 등)에 그대로 붙여 넣어 쓰면 됩니다.
AI 자체 평가 — 개선안을 쓴 AI 가 명확성 · 구체성 · 결과 형식 · 재사용성 기준(100점)으로 직접 매긴 점수 · 결과를 돌려 검증한 값은 아님
AI 역할레슨 01 배우기 ›
원문 · 없음AI 에게 맡길 역할이 정해져 있지 않아 답의 관점 · 수준이 그때그때 달라질 수 있었습니다.
개선 · 역할을 정함Act as a Senior Security Engineer and System Administrator.
입력 칸레슨 05 배우기 ›
원문 · 2개바꿔 넣을 자리가 일부만 표시돼 있어 쓸 때마다 원문을 고쳐야 했습니다.
개선 · 3개[or provided shell history: [INSERT_LOG_OR_HISTORY]
작업 순서레슨 07 배우기 ›
원문 · 5단계작업 순서가 덜 잘게 나뉘어 중간 단계를 빠뜨리기 쉬웠습니다.
개선 · 7단계
이 개선안에 쓰인 기법 — 프롬프트 클래스에서 배우기
원문
Please analyse our entire conversation and identify all specific commands used. Update permissions for both Claude Code and Gemini CLI. ## Reference Files - Claude: ~/.claude/settings.json - Gemini policy: ~/.gemini/policies/tool-permissions.toml - Gemini settings: ~/.gemini/settings.json - Gemini trusted folders: ~/.gemini/trustedFolders.json ## Instructions 1. Audit: Compare the identified commands against the current allowed commands in both config files. 2. Filter: Only include commands that provide read-only access to resources. 3. Restrict: Explicitly exclude any commands capable of modifying, deleting, or destroying data. 4. Update: Add only the missing read-only commands to both config files. 5. Constraint: Do not use wildcards. Each command must be listed individually for granular security. Show me the list of commands under two categories: Read-Only, and Write We are mostly interested in the read-only commands here that fall under the categories: Read, Get, Describe, View, or similar. Once I have approved the list, update both config files. ## Claude Format File: ~/.claude/settings.json Claude uses a JSON permissions object with allow, deny, and ask arrays. Allow format: `Bash(command subcommand:*)` Insert new commands in alphabetical order within the allow array. ## Gemini Format File: ~/.gemini/policies/tool-permissions.toml Gemini uses a TOML policy engine with rules at different priority levels. Rule types and priorities: - `decision = "deny"` at `priority = 200` for destructive operations - `decision = "ask_user"` at `priority = 150` for write operations needing confirmation - `decision = "allow"` at `priority = 100` for read-only operations For allow rules, use `commandPrefix` (provides word-boundary matching). For deny and ask rules, use `commandRegex` (catches flag variants). New read-only commands should be added to the appropriate existing `[[rule]]` block by category, or a new block if no category fits. Example allow rule: ```toml [[rule]] toolName = "run_shell_command" commandPrefix = ["command subcommand1", "command subcommand2"] decision = "allow" priority = 100 ``` ## Gemini Directories If any new directories outside the workspace were accessed, add them to: - `context.includeDirectories` in ~/.gemini/settings.json - ~/.gemini/trustedFolders.json with value "TRUST_FOLDER" ## Exceptions Do not suggest adding the following commands: - git branch: The -D flag will delete branches - git pull: Incase a merge is actioned - git checkout: Changing branches can interrupt work - ajira issue create: To prevent excessive creation of new issues - find: The -delete and -exec flags are destructive (use fd instead)
개선안 · 색칠한 [칸]에 내 내용을 넣어 쓰세요
Act as a Senior Security Engineer and System Administrator. Please analyse our entire conversation log [or provided shell history: [INSERT_LOG_OR_HISTORY]] and identify all specific CLI commands used. Your task is to propose permission updates for both Claude Code and Gemini CLI following strict least-privilege principles. ## Reference Files - Claude: ~/.claude/settings.json - Gemini policy: ~/.gemini/policies/tool-permissions.toml - Gemini settings: ~/.gemini/settings.json - Gemini trusted folders: ~/.gemini/trustedFolders.json ## Instructions 1. Audit: Compare identified commands against currently allowed commands in both config files. 2. Filter: Include only commands providing read-only access (verbs like read, get, describe, view, list, show). 3. Restrict: Explicitly exclude any commands capable of modifying, deleting, or destroying data. 4. Update: Add only missing read-only commands to both config files. 5. Constraint: Do not use wildcards (`*`). List each command explicitly for granular security. ## Execution Workflow & Output Format Step 1 (Audit & Categorization Phase): Before modifying any files, present the extracted commands in two Markdown tables: - Table 1: **Read-Only Commands** (Targeted for `allow` rules) - Table 2: **Write / Potentially Destructive Commands** (Targeted for `ask_user` or `deny` rules) Wait for my explicit approval before proceeding to Step 2. Step 2 (Configuration Update Phase - Post Approval): Generate exact JSON and TOML configuration snippets ready to be applied to the reference files. ## Format Specifications ### Claude Format (~/.claude/settings.json) - Uses JSON permissions object with `allow`, `deny`, and `ask` arrays. - Allow format: `Bash(command subcommand:*)` (Insert in alphabetical order within `allow`). ### Gemini Format (~/.gemini/policies/tool-permissions.toml) - `decision = "deny"` at `priority = 200` for destructive operations. - `decision = "ask_user"` at `priority = 150` for write operations needing confirmation. - `decision = "allow"` at `priority = 100` for read-only operations. - Use `commandPrefix` for allow rules; `commandRegex` for deny/ask rules. ## Gemini Directories If external directories were accessed, propose additions to: - `context.includeDirectories` in `~/.gemini/settings.json` - `~/.gemini/trustedFolders.json` with value `"TRUST_FOLDER"` ## Explicit Exceptions (Do Not Allow) - `git branch` (risk of destructive `-D` flag) - `git pull` (prevents unintended merges) - `git checkout` (prevents interrupting state changes) - `jira issue create` (prevents accidental issue creation) - `find` (destructive `-delete`/`-exec` flags; suggest `fd` instead)